How To Remove Pioneer Head Unit

One fine morn my pioneer car radio stopped working, and I checked power connections, wiring, grounding, etc., but it was not turning on.

So, I decided to remove information technology and test, but how to remove the Pioneer stereo from the dashboard? Let's discover out.

Equally an Amazon Associate, ImproveCarAudio will receive a small committee from qualifying purchases made through the links in this commodity.

As a general rule, to remove Pioneer stereo from the dashboard, first, remove the faceplate or trim panel carefully using your hands. Side by side, accept the extraction keys , insert them into the slots, and push them in until you hear a clicking sound. This volition unlock your automobile radio from the sidelock of the cage that holds the deck in its place. Now catch the stereo and pull information technology out with your manus.

Tip – Y'all should disconnect the machine battery to avoid a shock or short. And don't forget to remove the wiring at the back of the stereo after taking it out from the cage.

Whether your head unit of measurement is giving bug or you want to supervene upon it with a new one, you lot have to remove it from the dashboard. All the same, if you don't have extraction keys, yous tin still remove your pioneer stereo at home.

This article will teach you dissimilar methods to remove unmarried or double din Pioneer radio from the car with and without extraction keys.

How to Remove Single DIN Pioneer Head Unit of measurement?

You lot can remove the Single DIN Pioneer stereo from the dashboard without disassembling it. The removal process is easy and involves piddling or no technical knowledge.

There are no special tools required. The only things y'all will demand are:

Radio extraction keys

plastic prybar

Flathead screwdriver

Before removing the car stereo, always read the product manual or watch the video on youtube of the specific pioneer model considering of the differences in the design.

The following is a step-by-stride procedure on how to remove a single DIN Pioneer Head Unit of measurement:

Disconnect Car Battery

Condom is always the first priority equally you don't want any electric brusque circuit during the removal of the caput unit. So, open up the car bonnet (or hood) and find the battery.

Remove the negative terminal lead of the battery (commonly blackness) by unscrewing the nut and carefully placing information technology on one side of the hood.

Brand certain that the positive and negative leads of the battery do not bear upon each other.

Remove the Faceplate

Every mod automobile stereo has a detachable faceplate or trim panel. It is secured by clips and tin be easily removed by pressing a pocket-sized button on the side.

You can besides use a screwdriver, just put it below the trim and gently move it around to loosen the faceplate from the head unit. Once the trim panel gets loose, put information technology off with your hands.

In some cases, the trim panel is fastened to the motorcar radio past screws. In this scenario, check for the screws around the border of trim and unscrew them.

Be careful while removing the trim panel considering if it gets broken, yous will take to replace information technology with a new one.

Have off the Dashboard Covering

You can skip this step if y'all see ii slots on the vertical side of the stereo.

In newer cars or SUVs, removing the stereo may require an extra try as the stereo is covered with a dashboard panel instead of just trim alone.

Take a plastic prybar and insert information technology into the edge of the dashboard. And then, work your way around the dashboard panel until it pops out and uncovers the head unit.

Do not use the screwdriver or whatever other metallic tool to remove the dashboard, every bit this tin crevice the plastic console.

Insert The Extraction Keys

The car head unit is held by two clips, ane on each side. After removing the faceplate, you volition see ii slots forth the vertical side of the stereo.

At present accept the car radio extraction keys and insert them into these two slots. Radio keys usually come with your head unit, but y'all can purchase them online also.

Continue inserting the keys into the radio holes until you hear a click sound from both sides.

When you hear a click sound, the keys take released the clips that are holding the stereo into the dashboard.

If you have inserted the keys but exercise not hear, click sound, so effort removing the stereo. Chances are you have removed the clipping, or you tin can re-insert the radio keys.

Continue in mind that yous should keep the keys inside the slots when removing the radio, as if you lot remove the keys, the clips will concur the radio back.

The radio removal seems easy when y'all have all tools, but how to exercise it without the extraction keys when the radio is not locked in the dashboard? Below I take explained the pace-past-step process of stereo removal without keys.

Take the Stereo Out

Now grab the stereo from the edges and pull it out straight. You may accept to jiggle the head unit of measurement slightly to remove it from the case. Continue sliding the stereo until it comes out but make sure it does not autumn downwardly.

In one case information technology comes out, don't pull it further because it has wired connections at the back.

Remove the Wiring

Up to this point, the car stereo is non entirely gratuitous as it has wires connected to it at the dorsum.

There are at to the lowest degree two plugs at the back of the head unit – 1 is an antenna wire, and the other volition be RCA cables or a wire clamp. Squeeze the clench to release the head unit and open the antenna cable. Now your radio is free.

Congratulations, you lot accept just removed your Pioneer stereo.

These steps work with all kinds of Pioneer single din models, simply I recommend yous consult an expert if you are stuck in between.

How to Remove Double DIN Pioneer Caput Unit of measurement?

New stereos come fitted into their cages, and keys are used to remove them from the cage surround. The procedure of removing the double din pioneer caput unit of measurement is the same as the single din head unit of measurement.

Follow these steps to take out double din pioneer head unit of measurement from its case:

Disconnect the car battery first.

Remove the faceplate of the stereo or trim ring surround. Some of the pioneer stereos likeAVH-W4500NEX come up with detachable confront security, and yous start have to detach the screen from the stereo.

Depending on the model, there will exist two apertures for extraction keys on the horizontal or vertical side of the head unit, so insert the radio extraction keys into both apertures.

When you insert the keys deep plenty, yous volition hear a click sound meaning that your pioneer double din head unit is gratuitous from clips of the instance.

Now carefully remove the stereo and unplug all the wire harnesses from its back.

Do I Need Car Stereo Removal Keys to Remove My Pioneer Motorcar Radio?

The correct tools can brand our task easier and more accurate. For example, yous can strip wire insulation with a wire stripper or a plier, only some exercise it with their teeth.

The same is the case with stereo removal keys. Y'all do non always demand car stereo removal keys to remove your pioneer car radio. You can employ a blade, knife, or any tool that y'all can insert into the key slots.

How Do You Remove a Pioneer Automobile Stereo Without the Primal?

What if you don't have car extraction keys or the ones you have are not working correctly? The good news is, you can remove whatsoever Pioneer car stereo without the keys.

Kickoff, remove the faceplate and insert sharp objects like a blade or knife into the keyholes. Once you lot hear a click sound, it ways that you lot have successfully released the stereo from the holding instance, and you tin pull information technology from the dashboard. The last step is disconnecting the wires from the back of the stereo and taking it out.

If you lot notice any difficulty while removing the stereo, I recommend you take the help of an practiced to avoid impairment to either the radio or the dashboard.

Some Pioneer stereos are mounted using screws, and to remove these kinds of radios, you have to use a different approach.

If you follow the steps below, I am certain that you will be able to remove your double din stereo in less than 10 minutes.

Remove the negative lead of the auto battery for safety purposes.

Separate the faceplate from the mounting cradle. Usually, at that place is a button on the stereo that helps you hands remove the stereo faceplate. However, depending on the model of your stereo, the fashion to detach the faceplate from the caput unit may differ.

If you see a plastic plate around the faceplate, make sure to pull it out also.

Now unscrew the screws of the stereos with a flat head screwdriver.

Later this, remove the AC vents to aid you go more than access to the stereo.

In betwixt the ac vents, you will observe a window switch that tin can easily exist removed by easily as you take removed ac vents. Be gentle while removing the wires of the switch.

Now you accept removed the switch, and it'due south time to unscrew the bolts belongings the system. There may be two bolts – i is visible with naked eyes after removing the switch, and the other one is hiding behind the rubber lining. The best manner is to utilise a cordless impact wrench to remove these two bolts.

You will notice that a plastic console covers the whole stereo, and to take the radio from the dash, you also accept to remove this panel.

Subsequently removing the plastic encompass, the stereo is exposed, and yous volition see 4 screws along the perimeter of the stereo. Carefully hold the stereo in your hands and take it out afterward unscrewing these four screws.

Unplug the connectors at the dorsum of the stereo, and now your pioneer stereo is free.

How to Remove the Faceplate From Pioneer Stereo?

Pioneer introduced the concept of a separate faceplate in the 1980s. The principal purpose of detachable faceplates is to preclude whatever theft.

Nowadays, many Pioneer stereos come up with detachable faceplates, and the method to remove the faceplate depends on the model of your stereo. In near cases, however, only press a pocket-size button at the corner that says – "Eject" or "Release," and the faceplate volition come out.

To remove the faceplate, y'all don't need any tool or screwdriver.

To remove the faceplates ofPioneer MVH-S322BT, DEH-S4000BT, and DEH-S4010BT in-dash receivers, follow the steps below:

Look at the stereo's front panel, and y'all will see a button at the bottom right corner. Printing that button, and you will see that the system switches off, and the face starts to disassemble.

Now but lift a piddling bit on the correct-hand side, and yous will see the face will come right off in your manus.

For infotainment screens similar AVH-P8400BS, AVH-4100NEX or similar, impact the squirt button at the bottom right corner.

You lot will see a couple of options at the bottom of the screen. The outset option is for CD, the second for SD menu, and the third one is for squirt.

Bear upon on the eject (3rd one from left), and information technology will tell the organisation that you want to take the face off.

The screen will bend, and you will detect a picayune slider at the lesser, slide it over and printing it in. The face up comes right off.

Determination

In the above commodity, I have explained everything yous need to know to remove the pioneer stereo with keys and without keys.

In my stance, it's e'er better to have automobile stereo removal keys considering and then you don't accept to damage the locks of the example that holds the stereo.