How To Repair A Recoil Starter For Briggs And Stratton

Equally anyone who works with lawn equipment knows, small engine recoil starters eventually neglect. When your lawnmower, string trimmer or other tool's pull cord goes slack, starting the engine becomes incommunicable.

In most cases, the recoil starter fails because the spring slides out of place, causing it to lose tension. Luckily, when this happens, you tin gear up your recoil starter in about 20 minutes.
Your recoil starter may likewise fail considering the caster or recoil housing has worn and the spring no longer sits in the housing correctly. Nosotros used a Briggs and Stratton starter for this repair, only almost starters volition require the aforementioned steps. Visit our Briggs and Stratton parts folio to find the correct parts for your Briggs and Stratton starter.

[Back to Acme]

Repair the Recoil Starter The starter repaired in this video comes off a Briggs and Stratton engine. About recoil housings will be similar to this model.
Caution: One time you put tension on the pulley and spring, you volition want to concur the housing deeply. A small tab on the caster can cut your hand if you accidentally let go of the recoil starter when it is tensioned.

1. Remove the recoil housing cap

Unscrew the cap that holds the pulley to the recoil starter housing.

If your spring has slid out of the slots in the housing, and so you can continue with the repair. If the housing, pulley or spring have failed, then y'all volition need the proper replacement parts before standing.

two. Untie the rope

Untie the knot in the rope and slide information technology out of the housing.

3. Supersede parts (if needed)

Swap out the caster, housing or bound if the parts need replacing.

4. Re-tension the leap

Now it's fourth dimension to re-tension the spring. Think virtually how you want the rope to return into the housing. You lot will demand to current of air the caster in the reverse management.

With the pulley in the recoil housing, plough it about vi times. Once you lot take tensioned the spring, utilize a modest screwdriver to continue the pulley from spinning.

five. Attach the cap

Reattach the cap that holds the caster to the recoil housing. While the cap volition secure the assembly, it will not forbid the caster from spinning, and then keep a good grip on the pulley.

half-dozen. Reinstall the rope

Line upwards the holes on the pulley and the recoil housing and thread the rope through them both.

Tie a single overhand knot in the end of the rope. If you're worried almost the knot untying itself, add a blanket of thin super mucilage to proceed it secure.

Pull the starter cord tight in the housing and ensure the knot won't interfere with the pulley'southward ability to rotate in the housing.

seven. Coil the string

Hold the recoil starter firmly--it is still under tension--and remove the screwdriver.

Pull the starter string tight and then let go of the pulley. Control the rope speed as the caster winds the rope back into the starter.

[Back to Height]

Determination You tin can hands repair a broken pocket-sized engine recoil starter yourself. In many cases y'all can remedy a cleaved recoil starter with a screwdriver, the stock parts and about 20 minutes of time.
Since eReplacementParts.com stocks a wide assortment of pocket-sized engine parts. You can discover the recoil housing, spring or pulley y'all need for those times when the repair requires more than than merely re-tensioning the spring. Simply use our search feature to detect the correct parts for your lawn equipment and power tools. [Dorsum to Tiptop]